Step 3: Unclog and Clean the Vacuum’s Hose.

Start by turning the vacuum onto its side, then press the grey button.You should now be able to twist the main cylinder to unlock it.. Once the cylinder has been unlocked, you’ll be able to pull it away from the rest of the vacuum.

Don’t force it – the cylinder should come away easily if you’ve unlocked it correctly..The filter is located in the middle of the cylinder.There is a silver handle to use for removing it, as shown in the picture above..

Step 2: Wash The Filter.Now that the filter has been removed, the best way to clean it is to rinse it under a cold tap until the water runs clear..

The water flow should be gentle to avoid damaging the filter.

You also shouldn’t use any cleaning products or a dishwasher when washing the filter..The amount of suction depends on a variety of factors, such as the vacuum’s efficiency, filter type, and whether the body is fully sealed.. How Many Air Watts Does a Good Vacuum Cleaner Generate?.

As a general rule, an upright vacuum cleaner needs at least 100AW, while a cylinder vacuum cleaner needs around 220AW (these figures were provided by Hoover.).This isn’t an easy to question to answer, however, as air watts are just one way to measure a vacuum cleaner’s suction power.. As we mentioned earlier, air watts don’t measure how effective a vacuum is at picking up dirt and other debris.

Along with suction power, cleaning performance depends on the vacuum’s floorhead design, brush bar strength, and various other factors.of vacuum also affects the required air watts.